Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Ak 550
Part: Engine

The engine of the Kymco AK 550 can be dismantled by loosening the bolts that secure the block to its housing, allowing it to be completely removed after also disconnecting the exhaust and connectors attached to it. Once the engine block has been extracted, you can proceed by unscrewing the bolts that hold the cylinder and the valve cover, removing them to access the piston inside. The piston will need to be detached from its connecting rod, so that you can then access the further internal components that need to be replaced with new ones.

Updated on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Ak 550 In order to disassemble the engine of the Kymco AK 550, you need to loosen the screws that hold the engine to its housing, so that it can be complete…
Ak 550 The service light indicates that it is necessary to perform maintenance on our vehicle, sometimes it is also used to indicate the need to replace the…
Ak 550 In this tutorial, we will see how to change the engine oil on the Kymco AK 550 scooter, a very simple and quick operation. First, ensure that the eng…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos