Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Ak 550
Part: Engine

In order to disassemble the engine of the Kymco AK 550, you need to loosen the screws that hold the engine to its housing, so that it can be completely removed after also removing the tubes and connectors connected to it; once the engine block has been freed, you can proceed by loosening the screws that hold the cylinder and valve cover, removing them and accessing the piston inside. The piston must then be detached from its connecting rod, so that it is possible to access the additional internal components that need to be replaced with new spare parts.

Posted on 3 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Engine of the Kymco AK 550?
How to Dismantle the Engine of the Kymco AK 550?
Ak 550 The engine of the Kymco AK 550 can be dismantled by loosening the bolts that secure the block to its housing, allowing it to be completely removed af…
How to Replace the Battery on a Kymco AK 550
How to Replace the Battery on a Kymco AK 550
Ak 550 To replace the battery on a Kymco AK 550, you need to remove the rivets securing the windscreen so that it can be taken off. Once the windscreen is d…
How to Replace the Air Filter on the Kymco AK 550?
How to Replace the Air Filter on the Kymco AK 550?
Ak 550 To replace the air filter on the Kymco AK 550, you need to remove the plastic panel located between the steering wheel and the fuel filler cap. To re…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos