Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
I recommend trying to change the halogen bulbs to LEDs on your scooter yourself as it is a relatively simple task. It does require a bit of practice, but you can manage it. Switch off the scooter and disconnect the battery for safety reasons. Remove the fairing and front panel to access the headlights. Once you find the bulb connector, disconnect it and twist the bulb holder to extract the old halogen bulb. Insert the new LED bulb and reconnect everything. Before refitting the fairing, ensure the LEDs are working correctly; if the lights do not turn on, try reversing the polarity of the connector. Once everything is in place, reassemble the front and enjoy better visibility and a more modern look. If you are unsure about doing it yourself, contact an expert or a trusted garage.

Posted on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the transmission oil of the Kymco Xciting 400?
How do you replace the transmission oil of the Kymco Xciting 400?
Xciting 400 To perform the oil change of the Kymco Xciting 400 gearbox, you need to loosen the oil drain plug, located at the bottom rear of the transmission cas…
How to Replace the Footrests on the Kymco Xciting 400
Xciting 400 In today's video, see how to replace the original footrests on the Kymco Xciting 400. This operation may be necessary when the footrest covers are wo…
How do you replace the brake pads on the Kymco Xciting 400?
How do you replace the brake pads on the Kymco Xciting 400?
Xciting 400 To replace the brake pads of the Kymco Xciting 400, the same procedure must be followed for both the front and rear wheels: you will need to loosen t…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos