Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Has your Kymco Downtown 300i covered a certain number of miles and the Service light has come on? If you prefer to handle the engine oil change yourself, you will also need to reset the aforementioned light. If you don't know how to do it, watch the video guide provided and proceed: turn on the instrument panel, use the first button on the right below the display to access the Menu, and by pressing it again, you will reach the section of interest. To reset the warning, you need to hold down this button and the first button on the left for a few seconds. The operation is now complete.

Posted on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Kymco Downtown 300i?
How to Reset the "Service" Light on a Kymco Downtown 300i?
Downtown 300i First, sit on the seat of your Kymco Downtown 300i. Start by activating the instrument panel by turning the key in the ignition switch. Next, press a…
How do you reset the service light on the Kymco Downtown 300i?
How do you reset the service light on the Kymco Downtown 300i?
Downtown 300i Here we are at the moment when the service light appears on the instrument panel of our Kymco Downtown 300i scooter, which means performing scheduled…
How to Reset the Service Light on a Kymco Downtown 300i
How to Reset the Service Light on a Kymco Downtown 300i
Downtown 300i This guide outlines the procedure necessary to reset the service light for the regular oil change maintenance on the Kymco Downtown 300i scooter. Fir…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos