Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Kymco People S 125

Model: Kymco People S 125
Part: Battery

Video tutorial

In this article, we will see how to replace the battery on a Kymco People S 125. For this operation, you will need a flathead screwdriver and a crosshead screwdriver. First, remove the two screws located under the handlebars, as shown in the tutorial video below this article.

After removing the two crosshead screws, pry the clip located under the chrome at the front of the motor using the flathead screwdriver to remove the cover. Next, remove the two battery fastening screws, then disconnect the connectors.

Now you can remove the battery for replacement.


Posted on 8 March 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plug on a Kymco People S 125
Replacing the Spark Plug on a Kymco People S 125
People S 125 In this video tutorial, learn how to remove and replace the spark plug on a Kymco People S 125. First, remove the side fairing of the scooter to acce…
How to Replace the Belt on the Kymco People S 125
How to Replace the Belt on the Kymco People S 125
People S 125 To replace the transmission belt on the Kymco People S 125, you need to unscrew the bolts securing the cover near the rear wheel of the scooter, on t…
How to Replace the Rear Suspension on the Kymco People S 125
How to Replace the Rear Suspension on the Kymco People S 125
People S 125 The step-by-step instructions in this guide will show you how to dismantle and replace the rear suspension on the Kymco People S 125 scooter. First, …

How to Change the Engine Oil on a Yamaha SMAX 150 Scooter?

In this tutorial, see how to change the engine oil on a Yamaha SMAX 150 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool. Then, position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then remove the oil filter cap and clean it of any residue. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos