Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Xciting 300
Part: Wheel

This guide provides the instructions that will allow you to dismantle and remove the front wheel of the Kymco Xciting 300i scooter. First, place the scooter on the centre stand and start unscrewing the fastening screws of the brake caliper; then unscrew the wheel spindle screws using a socket wrench with an extension, thus removing the wheel, as shown in the video. At this point, if necessary, replace the tyre, then reassemble the front wheel; finally, reconnect the brake caliper and check its correct functioning!

Posted on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on the Kymco Xciting R 300i
How to Replace the Belt on the Kymco Xciting R 300i
Xciting 300 In this video tutorial, you will see the instructions to remove and replace the drive belt on the Kymco Xciting R 300i scooter. First, put the centra…
How to replace the front headlight bulbs on the Kymco Xciting 300i
How to replace the front headlight bulbs on the Kymco Xciting 300i
Xciting 300 The instructions in this guide will illustrate the procedure for removing and replacing the front headlight bulbs on the Kymco Xciting 300i scooter. …
How do you replace the transmission of the Kymco Xciting 300?
How do you replace the transmission of the Kymco Xciting 300?
Xciting 300 The transmission of the Kymco Xciting 300 can be replaced by loosening the screws that secure the transmission housing, located on the left side of t…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos