Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Kymco
  4. : Xciting 300

Kymco Xciting 300 - Video guides

Kymco Xciting 300
How to Dismantle the Wheel of a Kymco Xciting 300i

This guide provides the instructions that will allow you to dismantle and remove the front wheel of the Kymco Xciting 300i scooter. First, place the scooter on …Read all…
Posted on 26 May 2026 by ScegliAuto
Kymco Xciting 300
How to replace the front headlight bulbs on the Kymco Xciting 300i

The instructions in this guide will illustrate the procedure for removing and replacing the front headlight bulbs on the Kymco Xciting 300i scooter. First, …Read all…
Posted on 22 May 2026 by ScegliAuto
Kymco Xciting 300
How do you replace the transmission of the Kymco Xciting 300?

The transmission of the Kymco Xciting 300 can be replaced by loosening the screws that secure the transmission housing, located on the left side of the …Read all…
Posted on 28 July 2025 by ScegliAuto
Kymco Xciting 300
How do you replace the exhaust pipe of the Kymco Xciting 300?

To replace the exhaust pipe of the Kymco Xciting 300, you need to loosen the screws that hold it to its housing near the rear wheel, on the right side: once …Read all…
Posted on 1 September 2024 by ScegliAuto
Kymco Xciting 300
How to Change the Engine Oil on a Kymco Xciting?

To change the engine oil on your Kymco Xciting 300, first ensure the engine is cold. Then, place the scooter on a flat and stable surface. Remove the oil cap …Read all…
Posted on 20 September 2026 by ScegliAuto
Kymco Xciting 300
How to Replace the Spark Plug on the Kymco Xciting 300?

To replace the spark plug on the Kymco Xciting 300, first disconnect the corresponding ignition coil located above the spark plug itself: to access the coil, …Read all…
Posted on 25 July 2026 by ScegliAuto
Kymco Xciting 300
How to Replace the Belt on a Kymco Xciting 300?

To replace the belt on a Kymco Xciting 300, loosen the bolts securing the transmission cover located on the left side of the scooter near the rear wheel. Once …Read all…
Posted on 19 July 2026 by ScegliAuto
Kymco Xciting 300
How to Replace the Headlamp Bulb on the Kymco Xciting 300

To replace the headlamp bulb on the Kymco Xciting 300, fully loosen the screws securing the front fairing of the scooter so that it can be completely detached …Read all…
Posted on 15 July 2026 by ScegliAuto
Kymco Xciting 300
How to Replace the Belt on the Kymco Xciting R 300i

In this video tutorial, you will see the instructions to remove and replace the drive belt on the Kymco Xciting R 300i scooter. First, put the central stand …Read all…
Posted on 26 August 2026 by ScegliAuto
Kymco Xciting 300
How to Replace the Spark Plug on a Kymco Xciting 300

To replace the spark plug on this motorcycle model, follow the detailed steps below and you can also watch the video. First, remove the seat and the bodywork …Read all…
Posted on 31 July 2026 by ScegliAuto
Kymco Xciting 300
How to Replace the Voltage Regulator on a Kymco Xciting 300?

To replace the voltage regulator on a Kymco Xciting 300, remove all the screws securing the seat and lift it. The battery will be accessible, which must be …Read all…
Posted on 30 May 2026 by ScegliAuto
Kymco Xciting 300
How to Reset the "Service" Light on a Kymco Xciting 300

Before starting, sit on the rider's seat of your Kymco Xciting 300. Begin by activating the instrument panel by turning the key in the ignition switch. Next, …Read all…
Posted on 29 May 2026 by ScegliAuto

See also:

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos