Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Xciting 300
Part:

In this video tutorial, you will see the instructions to remove and replace the drive belt on the Kymco Xciting R 300i scooter. First, put the central stand down and start by unscrewing the fixing screws of the cover located at the bottom left; once the cover is removed, you can unscrew the nuts of the fan and clutch bell, then remove the drive belt as shown in the video. At this point, you can also replace the variator; then refit the belt onto the transmission, securing the nut of the fan and the clutch!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Wheel of a Kymco Xciting 300i
How to Dismantle the Wheel of a Kymco Xciting 300i
Xciting 300 This guide provides the instructions that will allow you to dismantle and remove the front wheel of the Kymco Xciting 300i scooter. First, place the …
How to replace the front headlight bulbs on the Kymco Xciting 300i
How to replace the front headlight bulbs on the Kymco Xciting 300i
Xciting 300 The instructions in this guide will illustrate the procedure for removing and replacing the front headlight bulbs on the Kymco Xciting 300i scooter. …
How to Replace the Belt on a Kymco Xciting 300?
How to Replace the Belt on a Kymco Xciting 300?
Xciting 300 To replace the belt on a Kymco Xciting 300, loosen the bolts securing the transmission cover located on the left side of the scooter near the rear wh…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos