Do it yourself
Frequently asked questions about cars and motorcycles
To replace the spark plug on this motorcycle model, follow the detailed steps below and you can also watch the video. First, remove the seat and the bodywork cover underneath. From beneath the scooter, start by removing the spark plug cap, then use a socket spanner to reach the spark plug and unscrew it. Extract the old spark plug and replace it with the new one, then screw it back in and reassemble all components in reverse order.

Updated on 31 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Xciting 300 To replace the spark plug on the Kymco Xciting 300, first disconnect the corresponding ignition coil located above the spark plug itself: to access t…
Xciting 300 The transmission of the Kymco Xciting 300 can be replaced by loosening the screws that secure the transmission housing, located on the left side of t…
Xciting 300 To replace the exhaust pipe of the Kymco Xciting 300, you need to loosen the screws that hold it to its housing near the rear wheel, on the right sid…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos