Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on your Kymco Xciting 300, first ensure the engine is cold. Then, place the scooter on a flat and stable surface. Remove the oil cap on the right side of the engine and place a container under the oil drain plug. Remove the drain plug and allow the used oil to drain completely. Check and replace any damaged seals. Tighten the drain plug securely. Proceed to fill the engine with the recommended oil to the appropriate level. Refit the oil cap and start the scooter to allow proper oil circulation. Turn off the engine and check the oil level using the dipstick. Add oil if necessary and close the oil cover. Finally, ensure proper disposal of the used oil.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on the Kymco Xciting R 300i
How to Replace the Belt on the Kymco Xciting R 300i
Xciting 300 In this video tutorial, you will see the instructions to remove and replace the drive belt on the Kymco Xciting R 300i scooter. First, put the centra…
How to replace the front headlight bulbs on the Kymco Xciting 300i
How to replace the front headlight bulbs on the Kymco Xciting 300i
Xciting 300 The instructions in this guide will illustrate the procedure for removing and replacing the front headlight bulbs on the Kymco Xciting 300i scooter. …
How to Replace the Spark Plug on the Kymco Xciting 300?
How to Replace the Spark Plug on the Kymco Xciting 300?
Xciting 300 To replace the spark plug on the Kymco Xciting 300, first disconnect the corresponding ignition coil located above the spark plug itself: to access t…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos