|
Do it yourself
| |||
| ||||
|
Model: Kymco Xciting 400
To reset the Oil Service light on the Kymco Xciting 400, insert the key into the ignition and turn it to switch on the instrument panel. The light will illuminate in red at the bottom left of the display: to reset it, press and hold the button located at the top right of the instrument panel. After holding the button for a few seconds, the Oil Service light will turn off, and you can release the button. Finally, switch off the instrument panel and remove the key.
Updated on 21 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Xciting 400
In this tutorial, you will see how to reset the oil service on the Kymco Xciting 400 scooter, a very simple and quick operation to perform only after…
Xciting 400
You can replace the clutch on the Kymco Xciting 400 by loosening the screws that secure the cover near the rear wheel on the left side of the bike: o…
Xciting 400
In this tutorial, we will see how to set the time on a Kymco Xciting 400 scooter, a very simple and quick operation to perform, for example, after di…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |