Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Xciting 400
Part: Clock

To set the clock on the Kymco Xciting 400, turn the ignition key to switch on the instrument panel. Once the panel is on, press and hold the orange button next to the right handlebar. The hours will start to flash, and you can adjust them using the up and down arrow buttons; then press and hold the orange button again to change the minutes, again using the arrow buttons. Once you have finished adjusting, you can switch off the instrument panel.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Xciting 400 In this tutorial, we will see how to set the time on a Kymco Xciting 400 scooter, a very simple and quick operation to perform, for example, after di…
Xciting 400 In today's video, see how to replace the original footrests on the Kymco Xciting 400. This operation may be necessary when the footrest covers are wo…
Xciting 400 In order to replace the air filter of the Kymco Xciting 400, you need to loosen the screws that secure the filter cover, located on the left side of …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos