Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on Kymco People GT 300i

Model: Kymco People Gt 300i
Part: Headlight bulb

Video tutorial

Let’s see how to disassemble and replace the front headlamp bulb on a Kymco People GT 300i scooter. First, remove the mirrors by taking off the rubber cover and unscrewing the screws with a spanner; then unscrew the screws of the plastic cover of the headlamp and also those on the sides, under the handlebars.

At this point, remove the front headlamp and disconnect the electrical connector of the bulb; now remove the rubber protective cap and unclip the metal spring to extract the bulb. Insert the new one, of the correct type and with H4 fitting!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How do you replace the headlight bulb of the Kymco People GT 300i?
How do you replace the headlight bulb of the Kymco People GT 300i?
People Gt 300i In order to replace the headlight bulb of the Kymco People GT 300i, you need to loosen the screws that secure the front panel of the fairing: the fix…
How to Replace the Belt on Kymco People GT 300i
How to Replace the Belt on Kymco People GT 300i
People Gt 300i Below are the instructions that will allow you to remove and replace the drive belt on the Kymco People GT 300i scooter by following these simple ste…
Guide to Removing the Rear Light of the Kymco People GT 300i
Guide to Removing the Rear Light of the Kymco People GT 300i
People Gt 300i Today's guide will illustrate the main steps useful for removing and replacing the rear light and its bulbs on the Kymco People GT 300i scooter. Firs…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos