|
Do it yourself
| |||
| ||||
|
Model: Kymco Downtown 300i
To replace the battery of the Kymco Downtown 300i, lift the seat to access the components inside the under-seat compartment. Remove all screws securing the compartment to allow it to be taken out, providing access to the lower part. This will enable you to locate the battery, which is situated at the front: to remove it, loosen its securing screws and disconnect it, replacing it with a new spare part. After the replacement, reinstall the under-seat compartment.
Updated on 1 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Downtown 300i
Follow these simple steps to remove and replace the battery on the Kymco Downtown 300i scooter. First, open the seat of your scooter; then proceed to…
Downtown 300i
First, sit on the seat of your Kymco Downtown 300i. Start by activating the instrument panel by turning the key in the ignition switch. Next, press a…
Downtown 300i
To replace the battery on the Kymco Downtown 300i, lift the seat to access the under-seat compartment. This compartment, along with its seat, must be…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |