Do it yourself
Frequently asked questions about cars and motorcycles
To replace the battery on the Kymco Downtown 300i, lift the seat to access the under-seat compartment. This compartment, along with its seat, must be removed by loosening the corresponding screws. Once the compartment is removed, you can access the battery located between the two rear shock absorbers. The device must be extracted from its housing by loosening its fixing bolts and disconnecting the terminals connected to the battery. A new replacement part can then be inserted, and all other parts can be reassembled.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Downtown 300i To replace the battery of the Kymco Downtown 300i, lift the seat to access the components inside the under-seat compartment. Remove all screws securi…
Downtown 300i Follow these simple steps to remove and replace the battery on the Kymco Downtown 300i scooter. First, open the seat of your scooter; then proceed to…
Downtown 300i First, sit on the seat of your Kymco Downtown 300i. Start by activating the instrument panel by turning the key in the ignition switch. Next, press a…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos