Do it yourself
Frequently asked questions about cars and motorcycles
This guide shows how to reset the service light for the regular oil change maintenance on the Kymco Downtown 300i scooter. First, turn on the ignition by turning the key to the ON position; keep the red battery button pressed. At this point, fully twist the throttle grip, waiting ten seconds after turning on the ignition, as shown in the video. You will see the service light on the dashboard start to flash; turn off the ignition and start the engine to complete the reset!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Downtown 300i First, sit on the seat of your Kymco Downtown 300i. Start by activating the instrument panel by turning the key in the ignition switch. Next, press a…
Downtown 300i This guide outlines the procedure necessary to reset the service light for the regular oil change maintenance on the Kymco Downtown 300i scooter. Fir…
Downtown 300i To reset the "SERVICE OIL" light on the Kymco Downtown 300i, follow this procedure. Insert the key and turn on the ignition (but not the engine), pre…

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos