|
Do it yourself
| |||
| ||||
Model: Kymco Like 125
In this video tutorial, you will learn how to remove and replace the fuel tap on the Kymco Like 125 scooter, following the instructions below. First, place your scooter on the centre stand and start siphoning all the fuel from the tank using a pump; then remove the under-seat compartment to access the fuel tap, as shown in the video. At this point, disconnect the fuel hose to remove the tap; replace it with the new one and reassemble everything!
Updated on 15 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Like 125
In this new guide dedicated to all of you who own a Kymco Like 125, we will explain how to correctly replace the rear wheel. First of all, make sure …
Like 125
Today's steps will show you the procedure for removing and replacing the drive belt on the Kymco Like 125 scooter. First, place the scooter on its ce…
Like 125
In order to replace the front turn signal light bulb of the Kymco Like 125, you need to reach inside the wheel well of the front wheel: here you will…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |