Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the ignition switch on a Kymco Agility, remove the screws securing the fairing under the handlebars and the front fairing of the bike, allowing them to be completely removed. Once all these covers are off, you will be able to access the components underneath: here you will find the ignition switch, which must be detached from its housing by unscrewing the fixing screws and disconnecting the connector. This will allow you to fit a new replacement part and reassemble all the components removed earlier.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plug from a Kymco Agility 125
How to Remove the Spark Plug from a Kymco Agility 125
Agility 125 Before you start, position your Kymco Agility 125 on the centre stand. Begin by removing the floor panel fairing by unscrewing the fixing screws. Nex…
How to replace the belt on a Kymco Agility 125
How to replace the belt on a Kymco Agility 125
Agility 125 This guide shows how to remove and replace the transmission belt on a Kymco Agility 125 scooter. First, place the scooter on its centre stand and sta…
How to Change the Engine Oil on the Kymco Agility
How to Change the Engine Oil on the Kymco Agility
Agility 125 Regular maintenance intervals must be followed; let’s see how to change the engine oil on the Kymco Agility scooter, both 125 and 200 models. First, …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos