Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this new mini guide, you will discover how to correctly replace the front bulb of your Kymco Like 125. First, you need to remove the front plastics, which can be done by unscrewing the screws that hold them in place with a cross-head screwdriver, located at the rear of the plastics themselves. Once done, gently pull the headlamp towards you and unscrew the bulb. Immediately after, correctly fit the new one and reposition the headlamp. Finally, refit all the various plastics removed earlier, and the procedure is finally complete.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front turn signal bulb on the Kymco Like 125?
How do you replace the front turn signal bulb on the Kymco Like 125?
Like 125 In order to replace the front turn signal light bulb of the Kymco Like 125, you need to reach inside the wheel well of the front wheel: here you will…
How to Replace the Headlight Bulb on a Kymco Like 125?
How to Replace the Headlight Bulb on a Kymco Like 125?
Like 125 To replace the headlight bulb on a Kymco Like 125, loosen the screws securing the front fairing of the motorcycle: the fixing screws are located at t…
How to Change the Dipped Beam Bulb of the Kymco Like 125
How to Change the Dipped Beam Bulb of the Kymco Like 125
Like 125 In this video tutorial, you will see how to remove and replace the dipped beam bulb of the front headlight of the Kymco Like 125 scooter, as well as …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos