Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Time on the Kymco XTown 300

Model: Kymco Xtown 300
Part: Clock

Video tutorial

If you want to manually change the time displayed on the central dashboard of your Kymco XTown 300, follow these steps. First, insert the key and turn on the ignition, then press and hold the button to the right of the speedometer until the hour digits start flashing.

Now, use the button located to the left of the speedometer to change the hour digits. Then, press the left button again to switch to minutes and repeat the same procedure.

Finally, do not press any buttons and allow the display to stop flashing to save the changes.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Xtown 300 To set the clock on the Kymco Xtown 300, press and hold the button located on the left side of the instrument panel, just below the speedometer; cont…
Xtown 300 To replace the transmission on a Kymco XTown 300, loosen the screws securing the transmission cover located on the left side of the bike near the rea…
Xtown 300 This guide provides instructions to remove the rear wheel of the Kymco Xtown 300 scooter. First, place the scooter on its centre stand and begin by r…

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos