Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Shield of the Kymco People GT 300i

Model: Kymco People Gt 300i
Part:

Video tutorial

In this video tutorial, we will see how to remove and replace the fairing or front shield of the Kymco GT 300i scooter, following the instructions below. First, place your scooter on the centre stand and start unscrewing the fastening screws found behind the plastic cover of the shield to remove it; then remove the rest of the screws using a cross screwdriver, as shown in the video.

At this point, remove the various clips located on the wheel arch to completely remove the shield; apply the reverse procedure for reassembly!


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Guide to Removing the Rear Light of the Kymco People GT 300i
Guide to Removing the Rear Light of the Kymco People GT 300i
People Gt 300i Today's guide will illustrate the main steps useful for removing and replacing the rear light and its bulbs on the Kymco People GT 300i scooter. Firs…
How do you replace the headlight bulb of the Kymco People GT 300i?
How do you replace the headlight bulb of the Kymco People GT 300i?
People Gt 300i In order to replace the headlight bulb of the Kymco People GT 300i, you need to loosen the screws that secure the front panel of the fairing: the fix…
How to Replace the Belt on Kymco People GT 300i
How to Replace the Belt on Kymco People GT 300i
People Gt 300i Below are the instructions that will allow you to remove and replace the drive belt on the Kymco People GT 300i scooter by following these simple ste…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos