Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, discover the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Kymco Xciting S 400i scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine using a socket spanner; allow the oil to drain into a container for about ten minutes. Now, unscrew the oil filter cover, removing and replacing the cartridge with a new one; unscrew the filler cap and pour in the suitable oil for your engine!

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Kymco Xciting S 400i
How to Change the Engine Oil and Oil Filter on a Kymco Xciting S 400i
Xciting S 400i The instructions in this guide will show you how to perform routine maintenance by changing the engine oil and oil filter on the Kymco Xciting S 400i…
How do you replace the engine oil of the Kymco Xciting S 400i?
How do you replace the engine oil of the Kymco Xciting S 400i?
Xciting S 400i To perform the oil change on the Kymco Xciting S 400i, you will need to loosen the screws that hold the drain plug of the oil pan located in the cent…
How to Change the Engine Oil on the Kymco Xciting S 400i
How to Change the Engine Oil on the Kymco Xciting S 400i
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, you need to unscrew the oil drain plug located at the bottom of the bike: this will allow you t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos