Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you will see how to easily switch between degrees Celsius and degrees Fahrenheit on a Kymco scooter: on the multifunction display, among other information, it shows 77 degrees Fahrenheit. Now, press the button located on the right side of the dashboard, which is the adjustment button. Just hold it down for a moment to see that it corresponds to 25 degrees Celsius. To switch from one measurement type to the other, simply hold down the adjustment button for a moment, and you can display it as you wish at any time.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Kymco
How to Reset the Oil Change Light on a Kymco
(Various brands) Various If you have undertaken an oil change on this scooter model yourself, you need to reset the oil change light that has illuminated on the dashboard to …
How to Replace the Engine Air Filter on a Scooter
How to Replace the Engine Air Filter on a Scooter
(Various brands) Various How to replace the engine air filter on a scooter? Follow this guide to proceed with the replacement. Position the scooter on its centre stand. Using…
What Are the Differences Between Various Oils
What Are the Differences Between Various Oils
(Various brands) Various In this video, we will clarify many of our doubts about multigrade oils for our engine: the numbers before and after the 'double W' indicate the mini…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos