Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Kymco Xciting 250

Model: Kymco Xciting 250 R
Part: Warning light – error code

Video tutorial

To reset the service light (or service indicator) on your Kymco Xciting 250, follow these steps: Turn on the ignition of your Kymco Xciting 250 without starting the engine. Press the mode selection button on the dashboard until you see the "SERVICE" option.

Press and hold the reset button on the dashboard for a few seconds. This button is usually located next to the mode selection button.

While holding the reset button, the service light (or service indicator) will start to flash or show a countdown on the display. Continue holding the reset button until the service light turns off or the countdown reaches zero.

This indicates that the service has been successfully reset. Release the reset button.

Turn off the ignition and turn it back on to check if the service light has reset correctly.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Kymco Xciting 250 R
How to reset the service light on the Kymco Xciting 250 R
Xciting 250 R Resetting the service light on a Kymco Xciting 250 R vehicle is a simple and quick operation to perform independently. To reset the light related to …
How to Change the Engine Oil of the Kymco Xciting 250 R?
How to Change the Engine Oil of the Kymco Xciting 250 R?
Xciting 250 R To change the engine oil on the Kymco Xciting 250 R, unscrew the oil drain plug located at the central lower part of the bike. This allows you to col…
How to Change the Engine Oil on the Kymco Xciting 250 R?
How to Change the Engine Oil on the Kymco Xciting 250 R?
Xciting 250 R To replace the engine oil on the Kymco Xciting 250 R, first remove the oil drain plug located at the central bottom of the vehicle. This will allow y…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos