Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Super 8 125
Part:

In order to replace the rearview mirrors of the Kymco Super 8 125, you need to loosen the screws that secure these elements to their housing: the screws can be found on the front part of the motorcycle, immediately below the left and right side of the windshield. Once all these screws have been loosened, it will be possible to completely detach the mirrors from their housing, so that the new replacement pieces can be installed. These should be secured with the appropriate screws to their housing, so that they can then be adjusted according to their needs.

Posted on 12 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…
How to Replace the Air Filter on the Kymco Super 8 125
How to Replace the Air Filter on the Kymco Super 8 125
Super 8 125 This guide provides instructions for removing and replacing the air filter of the engine on the Kymco Super 8 125 scooter, as well as the 150. First,…
How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 To replace the air filter on a Kymco Super 8 125, loosen the screws securing the cover on the left side of the bike, near the rear wheel and above th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos