Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Lada Kalina

Model: Lada Kalina MK 2 - Years 2013-2018
Part: Air filter

To replace the car engine air filter, it is necessary to follow the following simple steps: open the engine hood and locate the box containing the filter located in the front part of the engine compartment. Then locate the screws securing the cover of the compartment containing the filter and remove them. At that point, lift the cover and extract the filter (always check the specifications of the filter first in order to obtain a filter suitable for the type of vehicle and engine). Then place the new filter in the housing and refit the cover by re-tightening the screws.

Posted on 13 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter in the Lada Kalina?
How to replace the air filter in the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) Replacing the air filter in the Lada Kalina is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, we w…
How to replace the cabin filter in the Lada Kalina?
How to replace the cabin filter in the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) In this tutorial we can see how to replace the cabin filter in the Lada Kalina, a very simple operation. We start by removing the caps of the protect…
How to replace the engine oil and oil filter of the Lada Kalina
How to replace the engine oil and oil filter of the Lada Kalina
Lada Kalina (2004-2013 / MK 1) Let's find out how to replace the Lada Kalina engine oil and oil filter by following the instructions below. First of all we lift the car and start u…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos