Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on a Lada Xray

Model: Lada Xray MK 1 - Years 2015-2022
Part: Air filter

To replace the engine air filter on this vehicle yourself, follow the instructions provided in the video and the steps below. First, open the hood and locate the filter housing on the left side. Then, lift the cover of the compartment where the filter is secured, remove the old filter from the housing, and replace it with the new one after verifying compatibility with your vehicle model. Finally, reposition the filter housing cover and close it; the job is complete.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on a Lada Xray
Replacing the Cabin Air Filter on a Lada Xray
Lada Xray (2015-2022 / MK 1) In today's video, we will go over the main instructions to remove and replace the cabin air filter on a Lada Xray. First, open the front door and loc…
How to Replace the Bulbs in the Lada Xray?
How to Replace the Bulbs in the Lada Xray?
Lada Xray (2015-2022 / MK 1) To replace the bulbs in the Lada Xray, you will need to perform different operations depending on which bulb needs replacing. To remove the front hea…
How to Replace the Cabin Filter in a Lada Xray?
How to Replace the Cabin Filter in a Lada Xray?
Lada Xray (2015-2022 / MK 1) In this tutorial, you will see how to replace the cabin filter in a Lada Xray, a very simple and quick operation. First, sit in the passenger seat, t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos