Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Lada Xray?

Model: Lada Xray MK 1 - Years 2015-2022
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter in a Lada Xray, a very simple and quick operation. First, sit in the passenger seat, then go under the dashboard and locate the long rectangular cover on the left, at the junction with the center tunnel. Once you have done this, open it by unlocking the lower clip, remove the old filter, and insert the replacement, making sure to respect its orientation, usually indicated on the edge. If present, clean any residue inside the housing.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on a Lada Xray
Replacing the Cabin Air Filter on a Lada Xray
Lada Xray (2015-2022 / MK 1) In today's video, we will go over the main instructions to remove and replace the cabin air filter on a Lada Xray. First, open the front door and loc…
How to Replace the Cabin Air Filter of the Lada Xray 1.6
How to Replace the Cabin Air Filter of the Lada Xray 1.6
Lada Xray (2015-2022 / MK 1) Today, we will see in this brief guide how to remove and replace the cabin air filter of the Lada Xray with a 1.6 engine. First, get inside the vehic…
How to Change the Air Filter on a Lada Xray
How to Change the Air Filter on a Lada Xray
Lada Xray (2015-2022 / MK 1) To replace the engine air filter on this vehicle yourself, follow the instructions provided in the video and the steps below. First, open the hood an…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos