Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the Lada Xray?

Model: Lada Xray MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Brake pads

Video tutorial

To replace the front brake pads of the Lada Xray, lift the car using a jack so that the wheel corresponding to the pads being replaced is off the ground. You will also need to remove the wheel by unscrewing the bolts that hold it in place, allowing access to the components underneath.

Now, loosen the bolts that secure the brake caliper to the brake rotor so that it can be removed and the pads inside can be replaced. After replacement, reposition the caliper, securing it and reinstalling all previously removed components.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Lada Xray?
How to Replace the Cabin Filter in a Lada Xray?
Lada Xray (2015-2022 / MK 1) In this tutorial, you will see how to replace the cabin filter in a Lada Xray, a very simple and quick operation. First, sit in the passenger seat, t…
How to Replace the Cabin Air Filter of the Lada Xray 1.6
How to Replace the Cabin Air Filter of the Lada Xray 1.6
Lada Xray (2015-2022 / MK 1) Today, we will see in this brief guide how to remove and replace the cabin air filter of the Lada Xray with a 1.6 engine. First, get inside the vehic…
Replacing the Cabin Air Filter on a Lada Xray
Replacing the Cabin Air Filter on a Lada Xray
Lada Xray (2015-2022 / MK 1) In today's video, we will go over the main instructions to remove and replace the cabin air filter on a Lada Xray. First, open the front door and loc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos