Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Lada Granta?

Model: Lada Granta MK 1 - Years 2011-2024
Part: Brake pads

To replace the front brake pads on a Lada Granta, lift the vehicle so that the wheel corresponding to the pads to be replaced is not in contact with the ground. At this point, remove the lug nuts securing that wheel, taking it off to access the components behind it. Now, unscrew the bolts securing the brake caliper so that the pads inside can be removed and replaced with a new part; after the replacement, reattach the caliper and mount the corresponding wheel.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bulbs on a Lada Granta
How to Replace the Front Bulbs on a Lada Granta
Lada Granta (2011-2024 / MK 1) In today's video, you will see how to replace the front headlight bulb on the Lada Granta. This unit, type H4, serves as both the low beam and high b…
How to Replace the Front Position Bulb of the Lada Granta
How to Replace the Front Position Bulb of the Lada Granta
Lada Granta (2011-2024 / MK 1) In this video tutorial, we will see how to remove and replace the front position bulb of the Lada Granta headlight in simple and quick steps. First, …
What is the Fuse Diagram for the Lada Granta?
What is the Fuse Diagram for the Lada Granta?
Lada Granta (2011-2024 / MK 1) The video explains in detail the various fuses present in the Lada Granta. In addition to the location of the fuse box, the various images show the e…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos