Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs on a Lada Granta

Model: Lada Granta MK 1 - Years 2011-2024
Part: Light bulb

In today's video, you will see how to replace the front headlight bulb on the Lada Granta. This unit, type H4, serves as both the low beam and high beam. If the vehicle has been in motion, let it cool down to avoid burns. Once done, open the hood and, after locating the bulb that needs replacement, proceed. Remove the plastic cover and disconnect the power connector. Now, rotate the base of the bulb and pull it out; at this point, insert the new unit.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Position Bulb of the Lada Granta
How to Replace the Front Position Bulb of the Lada Granta
Lada Granta (2011-2024 / MK 1) In this video tutorial, we will see how to remove and replace the front position bulb of the Lada Granta headlight in simple and quick steps. First, …
How to Replace the Front Brake Pads on a Lada Granta?
How to Replace the Front Brake Pads on a Lada Granta?
Lada Granta (2011-2024 / MK 1) To replace the front brake pads on a Lada Granta, lift the vehicle so that the wheel corresponding to the pads to be replaced is not in contact with …
Replacing the Cabin Air Filter on the Lada Granta
Replacing the Cabin Air Filter on the Lada Granta
Lada Granta (2011-2024 / MK 1) In this brief and simple guide, let's see how to remove and replace the cabin air filter on the Lada Granta. First, open the hood and start unscrewin…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos