Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight in a Lada Granta?

Model: Lada Granta MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light

Video tutorial

As shown in this tutorial, removing the rear headlight in a Lada Granta is an extremely simple and quick task. Before proceeding, ensure the key is not in the ignition for safety.

Start by opening the trunk, then open the small panel on the back of the headlight, disconnect the bulb connectors, and using a 10mm socket wrench, remove the mounting nuts. Once done, pry at the rear of the headlight to release it from the clip and pull it out from the body.

At this point, you can proceed with replacing the damaged component.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Lada Granta
How to Remove the Rear Bumper of a Lada Granta
Lada Granta (2011-2024 / MK 1) To remove the rear bumper of a Lada Granta, follow these steps. Open the rear hatch and, moving the carpet cover near the taillights, remove the thre…
How to Replace the Wheel on a Lada Granta
How to Replace the Wheel on a Lada Granta
Lada Granta (2011-2024 / MK 1) Today, you will learn how to remove and replace the wheel with the spare on a Lada Granta, following the instructions below. First, retrieve the spar…
Replacing the Cabin Air Filter on the Lada Granta
Replacing the Cabin Air Filter on the Lada Granta
Lada Granta (2011-2024 / MK 1) In this brief and simple guide, let's see how to remove and replace the cabin air filter on the Lada Granta. First, open the hood and start unscrewin…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos