Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Lada Niva

Model: Lada Niva Vaz2131, Vaz2121 - Years 1977-2019
Part: Brake pads

Below are the instructions for removing and replacing the front brake pads on the Lada Niva. First, lift the vehicle and start by removing the front wheel; then undo the retaining screws of the front brake caliper, applying pressure to the caliper piston to remove it from the disc, as shown in the video. At this point, remove the old brake pads, cleaning the caliper of any residual dirt; then install the new front brake pads, correctly refitting the brake caliper onto the disc.

Posted on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlights on a Lada Niva?
How to Replace the Front Headlights on a Lada Niva?
Lada Niva (1977-2019 / Vaz2131, Vaz2121) In this tutorial, see how to replace the front headlights on a Lada Niva, a very simple and quick operation. First, using a cross-head screwdriver, r…
How to Remove the Rear Seats of a Lada Niva
How to Remove the Rear Seats of a Lada Niva
Lada Niva (1977-2019 / Vaz2131, Vaz2121) To remove the rear seats of the Lada Niva, loosen the screws located at the base of the seats; next, fold down the backrests of the rear seats to acc…
How to Replace the Coolant in the Lada Niva
How to Replace the Coolant in the Lada Niva
Lada Niva (1977-2019 / Vaz2131, Vaz2121) Briefly, we will review the main instructions on how to dismantle and replace the engine coolant in the Lada Niva. First, raise the vehicle and start…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos