Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the headlight bulb in a Lada Niva

Model: Lada Niva Vaz2131, Vaz2121 - Years 1977-2019
Part: Headlight bulb

In this video tutorial, you can see how to replace the headlight bulb in a Lada Niva by following a few simple steps: the first thing you need to do is remove the plastic front grille by unscrewing the six fixing screws. Once the six screws are removed, take out the plastic grille from its location. Using a cross-head screwdriver, unscrew the fixing screws of the headlight and then remove the headlight from its location. Now, disconnect the cable by pulling the tab outward. Place the headlight on a table for easier access, unclip the bulb retaining spring, and remove the old bulb from its socket. Replace the old bulb with a new working one (H4 halogen bulb); reassemble all parts in reverse order.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Lada Niva (1977-2019 / Vaz2131, Vaz2121) In a few simple steps, we will see how to disassemble and replace the front headlight and its bulb of the Lada Niva. First of all, let's move to the …
Lada Niva (1977-2019 / Vaz2131, Vaz2121) In this tutorial, see how to replace the front headlights on a Lada Niva, a very simple and quick operation. First, using a cross-head screwdriver, r…
Lada Niva (1977-2019 / Vaz2131, Vaz2121) Briefly, we will review the main instructions on how to dismantle and replace the engine coolant in the Lada Niva. First, raise the vehicle and start…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos