Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats of a Lada Niva

Model: Lada Niva Vaz2131, Vaz2121 - Years 1977-2019
Part: Seat

To remove the rear seats of the Lada Niva, loosen the screws located at the base of the seats; next, fold down the backrests of the rear seats to access the screws at the base of the seats. Once the screws at the rear of the vehicle have been loosened, you can extract the seats from the cabin and insert the new ones. At this point, secure them with the screws, ensuring everything functions correctly.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in the Lada Niva
How to Replace the Coolant in the Lada Niva
Lada Niva (1977-2019 / Vaz2131, Vaz2121) Briefly, we will review the main instructions on how to dismantle and replace the engine coolant in the Lada Niva. First, raise the vehicle and start…
How to Replace the Front Headlights on a Lada Niva?
How to Replace the Front Headlights on a Lada Niva?
Lada Niva (1977-2019 / Vaz2131, Vaz2121) In this tutorial, see how to replace the front headlights on a Lada Niva, a very simple and quick operation. First, using a cross-head screwdriver, r…
How to disassemble the front headlight of the Lada Niva
How to disassemble the front headlight of the Lada Niva
Lada Niva (1977-2019 / Vaz2131, Vaz2121) In a few simple steps, we will see how to disassemble and replace the front headlight and its bulb of the Lada Niva. First of all, let's move to the …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos