Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Lada Granta FL

Model: Lada Granta MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

Video tutorial

In this video tutorial, you can see how to replace the air filter in a Lada Granta FL by following a few simple steps: the first thing to do is purchase a quality air filter from an authorized dealer; the next step is to get in the vehicle, start the engine, and lift the front windshield wipers to prevent them from interfering during the removal of the cover; turn off the car and pull the handbrake.

Lift the hood and secure it with the prop rod; using a Torx wrench, remove the fasteners of the cover as shown in the video.

Remove the cover to access the air filter; take out the old filter element, clean any dirt in the housing; install the new air filter and reassemble the filter cover.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on a Lada Granta?
How to Remove the Air Filter on a Lada Granta?
Lada Granta (2011-2024 / MK 1) In this tutorial, you will see how to remove the air filter on a Lada Granta, a very simple and quick operation to perform if you need to clean it or…
Replacing the Cabin Air Filter on the Lada Granta
Replacing the Cabin Air Filter on the Lada Granta
Lada Granta (2011-2024 / MK 1) In this brief and simple guide, let's see how to remove and replace the cabin air filter on the Lada Granta. First, open the hood and start unscrewin…
How to Replace the Tail Light Bulbs in a Lada Granta?
How to Replace the Tail Light Bulbs in a Lada Granta?
Lada Granta (2011-2024 / MK 1) In this tutorial, you will see how to replace the tail light bulbs in a Lada Granta, a very simple and quick operation. First, open the trunk lid, th…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos