Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lancia
  4. :
  5. Delta
  6. : Car stereo

Lancia Delta - Car stereo

Car Stereo Lancia Delta (2008-2014 / mk 3)

Lancia Delta (2008-2014 / MK 3)
How to install a 2 DIN car radio in the Lancia Delta

In this video, you will see how to install a 2 DIN car radio in the Lancia Delta. The same procedure can be applied to other car models. After removing the old …Read all…
Posted on 6 August 2026 by ScegliAuto
Lancia Delta (2008-2014 / MK 3)
Removing the Radio from a Third Generation Lancia Delta

Today, you will see how to remove the radio from a third generation Lancia Delta in simple steps. First, get inside the car and equip yourself with plastic …Read all…
Posted on 28 April 2026 by ScegliAuto
Lancia Delta (2008-2014 / MK 3)
How to Remove an Original Radio on a Lancia Delta

How to remove an original radio on a Lancia Delta? Follow this video closely to perform the disassembly according to the guidelines. Use the original metal …Read all…
Posted on 14 March 2026 by ScegliAuto

Airbag (2) Speaker (2) Air conditioning (1) Car stereo (3) Battery (1) Control arm (1) Transmission (2) Spark plugs (1) Body (1) Control unit (1) Key (2) Timing belt (2) Checks and maintenance (3) Dashboard (3) Shifter boot (1) Headlight (1) Tail light (3) Cabin air filter (2) Grille (1) Accessory kit (1) Light bulb (1) Headlight bulb (1) License plate light (1) Handle (2) Trim cover (1) Transmission fluid (1) Engine oil (1) Clock (3) Door trim panel (1) Rear bumper (1) Pump (1) Instrument cluster (2) Radiator (1) Fuse box (7) Seat (2) Door lock (1) Warning light – error code (4) Service warning light (5) EGR valve (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos