Do it yourself
Frequently asked questions about cars and motorcycles

How to install a 2 DIN car radio in the Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Car stereo

In this video, you will see how to install a 2 DIN car radio in the Lancia Delta. The same procedure can be applied to other car models. After removing the old car radio, unscrew the six screws located inside the cage where the radio will go. The video clearly indicates the position of the screws. At this point, gently pull out the entire block, being careful with the three connectors at the back. Then remove the four screws at the back and take out the original cage. Refit the dashboard by connecting a wire to the orange one of the two side connectors needed to activate the stereo lights. From here, complete the connections and insert the new car radio.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Lancia Delta (2008-2014 / MK 3) Today, you will see how to remove the radio from a third generation Lancia Delta in simple steps. First, get inside the car and equip yourself with p…
Lancia Delta (2008-2014 / MK 3) How to remove an original radio on a Lancia Delta? Follow this video closely to perform the disassembly according to the guidelines. Use the original…
Lancia Delta (2008-2014 / MK 3) Demonstration video on how to remove the climate control panel. In this example, we have a 2008 Lancia Delta, but the process is simpler on other veh…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos