Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Third Generation Lancia Delta

Model: Lancia Delta MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

Today, you will see how to remove the radio from a third generation Lancia Delta in simple steps. First, get inside the car and equip yourself with plastic levers to disengage some internal parts: then use the appropriate tools that act as extractors (which you will insert into the designated holes) and pull until the radio is extracted.

At this point, simply disconnect the power connector located at the back and remove the antenna cable. For reassembly, reconnect the cables and insert the radio until it clicks into place.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box on the Lancia Delta 3?
Where is the Fuse Box on the Lancia Delta 3?
Lancia Delta (2008-2014 / MK 3) If you own a third-generation Lancia Delta (2008-2014) and want to find out where the fuse box is located, simply read the following instructions car…
How to Set the Time on the Lancia Delta
How to Set the Time on the Lancia Delta
Lancia Delta (2008-2014 / MK 3) In today's video, you will see how to set the time and date on the third series Lancia Delta. First, turn on the vehicle's ignition. Press the set bu…
How to Change the System Language on the Lancia Delta 3
How to Change the System Language on the Lancia Delta 3
Lancia Delta (2008-2014 / MK 3) If you want to change the system language used on your Lancia Delta third series (2008-2014) but do not know how to do it, do not worry as this guide…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos