Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : Where is the Lancia Delta 3 fuse box

Lancia Delta - Video tutorial

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Fuse box
Operation: Where is the Lancia Delta 3 fuse box

If you own a third series Lancia Delta (year 2008-2014) and you want to find out where the fuse box is located, all you have to do is read the following instructions carefully and then put them into practice. First of all, go inside the passenger compartment and make sure that your Delta is completely off and with the handbrake activated for safety reasons. Immediately afterwards, identify the small compartment located at the left end of the dashboard and disassemble it with your own hands. Immediately behind you will finally have free access to the various fuses of the car.


Posted on 30 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Delta 2008-2014 - Where is the Lancia Delta fuse box located? Read Answer
    • Delta 2008-2014 - How much does a Lancia Delta cigarette lighter fuse cost? Read Answer
    • Delta 2008-2014 - Where are the Lancia Delta fuses located? Read Answer
    • Delta 2008-2014 - Where is the Lancia Delta cigarette lighter fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos