Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : What is the fuse diagram of the Lancia Delta?

Lancia Delta - Video tutorial

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Fuse box
Operation: What is the fuse diagram of the Lancia Delta?

In the event that a device on our Lancia Delta suddenly stops working, we can first of all check the state of the respective fuses, the diagrams of which are shown in this video. As shown, the first master box is located inside the cockpit, below the dashboard on the driver's side. The second box is instead positioned inside the engine compartment, protected by the black cover located just behind the battery. In the event of a damaged fuse, make sure you use a replacement of equivalent specification and always operate with the vehicle switched off.


Posted on 23 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Delta 2008-2014 - Where is the Lancia Delta fuse box located? Read Answer
    • Delta 2008-2014 - How much does a Lancia Delta cigarette lighter fuse cost? Read Answer
    • Delta 2008-2014 - Where are the Lancia Delta fuses located? Read Answer
    • Delta 2008-2014 - Where is the Lancia Delta cigarette lighter fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos