Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : How to replace the battery on a Lancia Delta

Lancia Delta - Video tutorial

Model: Lancia Delta MK 1 - Years 1979-1993
Part: Battery
Operation: How to replace the battery on a Lancia Delta

How to replace the battery on a Lancia Delta? This video tells us how to disassemble the battery. Let's see: we open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and raise the front hood, releasing the locking lever with the fingers, then, we secure the same with the rod . Once the engine compartment is open, we will find the battery to be replaced on the right. We begin to unscrew the tightening pins of the battery terminals with a special socket wrench, disconnect the lock plate of the same (if present). We remove the old battery and mount a new one, tighten the power supply terminals. We close the battery compartment and close the engine hood.


Posted on 19 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos