Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel of the Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Steering wheel

Removing the steering wheel of the Lancia Delta? Follow these steps to disassemble the airbag and steering wheel. Insert the removal key into the slots at the back of the steering wheel and release the clips until the airbag is free. Once the airbag is detached, disconnect its power connectors and remove it from the steering wheel. Unscrew the central pin and take the steering wheel off the column. Fit the new steering wheel and tighten the securing nut, then reconnect the airbag power connector and secure the pins at the back of the steering wheel. Start the vehicle and check the operation of the power steering and the horn of the Lancia steering wheel.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove an Original Radio on a Lancia Delta
How to Remove an Original Radio on a Lancia Delta
Lancia Delta (2008-2014 / MK 3) How to remove an original radio on a Lancia Delta? Follow this video closely to perform the disassembly according to the guidelines. Use the original…
Removing Airbag from Steering Wheel of Lancia Delta
Removing Airbag from Steering Wheel of Lancia Delta
Lancia Delta (2008-2014 / MK 3) Removing the airbag from the steering wheel of a Lancia car, in this case a Lancia Delta model sold since 2008, is extremely easy. Here’s how to do i…
Removing the Steering Wheel Control Panel on the Lancia Delta
Removing the Steering Wheel Control Panel on the Lancia Delta
Lancia Delta (2008-2014 / MK 3) In this video, you will see how to remove the silver panel that surrounds the steering wheel controls of a Lancia Delta. Get inside the vehicle: the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos