Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lancia
  4. :
  5. Delta
  6. : Disassembly of airbags on Lancia Delta

Lancia Delta - Video tutorial

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Airbags
Operation: Disassembly of airbags on Lancia Delta

Insert a torx wrench or a flat screwdriver in one of the two out on the underside of the steering wheel. Arrived with the screwdriver at the end of travel, push in order to move the tab that holds the airbag fixed. Carry out the same operation in the other hole below the steering wheel and extract the central part of the same, that is the airbag. Now you can see the mechanism of the fixing tabs. Disconnect any cables and connectors and the airbag is completely removed. To reassemble it, simply push it into place until you hear the sound of the tabs fastening.


Posted on 20 March 2024 by ScegliAuto



How to remove the rear light of a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Before we can start, we will have to get out of the cockpit of our Lancia Delta, and then head towards the lower rear side of the vehicle. So let's s
Lancia Delta third series car radio disassembly
Lancia Delta (2008-2014 / MK 3) Today we will see in simple steps how to disassemble the car radio of a third generation Lancia Delta. First, let's get inside the car and equip ours
Where is the Lancia Delta 3 fuse box
Lancia Delta (2008-2014 / MK 3) If you own a third series Lancia Delta (year 2008-2014) and you want to find out where the fuse box is located, all you have to do is read the follow

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos