Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Key Remote on a Lancia Delta - Fiat Bravo

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Key

In this video tutorial, you will see how to dismantle the key remote or shell of a Lancia Delta, as well as the second-generation Fiat Bravo. First, take your remote and use a flat screwdriver to turn the screw found on the side to remove the battery compartment; then, pry open the sides of the remote to separate it into two parts, as shown in the video. At this point, you can remove your key and the electronic board to transfer everything to the new remote; follow the video to the end for reassembly!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Lancia Delta 3 located?
Where is the fuse box of the Lancia Delta 3 located?
Lancia Delta (2008-2014 / MK 3) In this new mini guide we will discover where the box containing all the various fuses inside your Lancia Delta Mk3 is located. First of all, the veh…
How to Replace the Rear Door Speaker on a Lancia Delta
How to Replace the Rear Door Speaker on a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Before you start, open the rear door of your Lancia Delta. Begin by removing the door panel, disengaging and removing all the inserts, then unscrew a…
How to Remove the Steering Wheel of the Lancia Delta
How to Remove the Steering Wheel of the Lancia Delta
Lancia Delta (2008-2014 / MK 3) Removing the steering wheel of the Lancia Delta? Follow these steps to disassemble the airbag and steering wheel. Insert the removal key into the slo…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos