Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Airbag from Steering Wheel of Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Airbag

Removing the airbag from the steering wheel of a Lancia car, in this case a Lancia Delta model sold since 2008, is extremely easy. Here’s how to do it! On the back of the steering wheel, you will notice two holes, one on the right and one on the left. By inserting small flathead screwdrivers into those holes, you can push the clips that hold the airbag cover in place. Be careful! To remove the airbag cover, it is not necessary to remove the entire steering wheel from the car, as shown in the video, which was done for illustrative purposes to best show you how the anchoring mechanism works.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel of the Lancia Delta
How to Remove the Steering Wheel of the Lancia Delta
Lancia Delta (2008-2014 / MK 3) Removing the steering wheel of the Lancia Delta? Follow these steps to disassemble the airbag and steering wheel. Insert the removal key into the slo…
Removing the Steering Wheel Control Panel on the Lancia Delta
Removing the Steering Wheel Control Panel on the Lancia Delta
Lancia Delta (2008-2014 / MK 3) In this video, you will see how to remove the silver panel that surrounds the steering wheel controls of a Lancia Delta. Get inside the vehicle: the …
How do you reset the Service light on the Lancia Delta?
How do you reset the Service light on the Lancia Delta?
Lancia Delta (2008-2014 / MK 3) The procedure for resetting the Service light on the Lancia Delta involves connecting a diagnostic tool to the OBD port of the vehicle: this port can…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos