Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to remove the door panel from a Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y3, 846, MK 3, Ypsilon 3 - Years 2011-2023
Part: Door
Operation: How to remove the door panel from a Lancia Ypsilon

In this video, we see how to remove the panel from the door of a Lancia Ypsilon. First, we remove all the screws, starting from the top where the lock and the handle for internal opening are located, then we continue following the perimeter of the lining. We then remove the cover of the handle and also remove the screws from there. We pry with a screwdriver from the bottom of the panel to loosen it, then we also pry from the outside. Now we can remove the electrical connector of the window buttons and proceed to remove the entire panel.


Posted on 23 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ypsilon 2011-2023 - Why is the Lancia Ypsilon tailgate locked? Read Answer
    • Ypsilon 2011-2023 - Why doesn't the boot of the Lancia Ypsilon open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos