Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : How to adjust the Lancia Delta time

Lancia Delta - Video tutorial

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Instrument cluster
Operation: How to adjust the Lancia Delta time

In today's video we see how to adjust the time and date in the Lancia Delta third series. First we turn on the ignition of the car. We press the set button, located on the right side of the car radio. Let's move on to the on-board computer, scrolling through its settings using the arrows on the steering wheel spoke. Once the date and time item has been identified, confirm and enter the setting. We then adjust the parameters according to the correct settings and then confirm with the correct key. The operation will then be terminated and immediately visible to us.


Posted on 25 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Delta 2008-2014 - Where is the meaning of the warning lights on the Lancia Delta? Read Answer
    • Delta 2008-2014 - What to do if the Lancia Delta's Blue & Me system does not work? Read Answer
    • Delta 2008-2014 - Meaning of Lancia Delta warning lights? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos