Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the engine light on a Lancia Musa with GPL

Model: Lancia Musa MK 1 - Years 2004-2012
Part: Warning light – error code

In this video we see the problem of a Lancia Musa with a mixed petrol and LPG system, where the engine light only comes on if the car is fueled with gas, while it does not give any problem if fueled with petrol. In this case, the problem is in 99% of cases caused by the LPG injectors, which can only be solved by changing them (it is advisable to change them all, to prevent the problem from recurring later on). Once the replacement is done, it is necessary to clear the error using an OBD11 device, otherwise the light will continue to stay on.

Posted on 1 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gas Struts on the Rear Bonnet of a Lancia Musa
How to Replace the Gas Struts on the Rear Bonnet of a Lancia Musa
Lancia Musa (2004-2012 / MK 1) If the rear bonnet does not stay up after being opened, it means the gas struts are damaged: replacing them is very simple and economical as a pair i…
How to Remove the Cabin Air Filter from a Lancia Musa
How to Remove the Cabin Air Filter from a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …
What is the Reverse Light Fuse in the Lancia Musa?
What is the Reverse Light Fuse in the Lancia Musa?
Lancia Musa (2004-2012 / MK 1) If the reverse light of your Lancia Musa has suddenly stopped working, and the bulb is in good condition, the first thing you can do is check the con…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos