Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
MK 2, 843, Ypsilon 2, Y2
- Years 2003-2011 How to remove and replace the front brake disc pads on a Lancia Ypsilon. We place our car on a column bridge, we lift to a comfortable height to intervene. Unscrew the pins with a telescopic wrench or compressed air drill and remove the rim, then we begin to unscrew the brake caliper pins by detaching it from the support. With a screwdriver we detach the brake pads. We mount the new brake pads with all the pins attached, we tighten the caliper support to the disc, then, we mount the brake caliper, remembering to tighten all the pins well. Before mounting the rim, we bleed the brake caliper if necessary. Finally we assemble the circle with the pins.
Posted on 14 October 2023 by ScegliAuto
How to remove the front brake disc of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) How to remove the front brake disc of a Lancia Ypsilon. We place our car on a column or jack bridge, we lift to a comfortable height to intervene. Un
How to replace discs and pads on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) How to replace brake discs with relative pads on a Ypsilon? Let's see the disassembly of the parts in the Lancia car. We lift the car with a column b
How to replace the front brake pads on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Let's see how to replace the front brake pads on a Lancia Ypsilon. We raise the car on a column point (jack) to the desired height, immediately after Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |